Builders Edge 130130003089 Guía de instalación descargar pdf

-To be installed prior to siding-

Step 1

Remove the Trim Ring from the Split Block.

Fasten the bottom of the Split Block in the

desired location. See Figure 1 below.

Step 4

Install the Trim Ring by locking it into place. It may

be necessary to cut the ring along the v-groove on

the back of the part to prevent interference. See

Figure 4 below.

Step 2

Reassemble the top to the bottom and fasten

it into place. See Figure 2 below.

Step 3

Cut the siding around the Split Block. Install the

siding according to the manufacturer's intallation

instructions. See Figure 3 below.

I-0138

5-31-07

PC10553

Insulated Siding Split Block

Installation Instructions

Figure 4

Figure 1

Figure 2

Figure 3

Note

The Extension Ring is provided for thicker siding

applications allowing material thickness up to 1 5/8".

The Trim Ring will accomodate thicknesses of

3/4", 1", and 1 1/4". See Figure 5 below.

Extension Ring Trim Ring

Figure 5

-To be installed prior to siding-Step 1 Remove the Trim Ring from the Split Block.Fasten the bottom of the Split Block in the desired location. See

Sin comentarios

Builders Edge 130130003089 Guía de instalación